Complete Solution for Evaluating the Performance and Capability of Talaria TWO Modules
The INP3010/3011 EVB-A evaluation kits are available for measuring the performance and capability of the Talaria TWO INP1010/1011 modules. The modules use InnoPhase’s award-winning Talaria TWO Multi-Protocol Platform with WiFi and BLE for wireless data transfer, an embedded Arm Cortex-M3 for system control and user applications plus advanced security elements for device safeguards.
The kits include an Arduino UNO format baseboard with an INP1010 or INP1011 module attached. The boards can be used in stand-alone mode or attached to an Arduino UNO compatible host or shield board. The baseboards have all module GPIOs accessible through either an internal 20-pin header or the Arduino connectors. Power is supplied from USB, host Arduino board or battery connector. Also mounted on the baseboards are environmental sensors for capturing temperature, humidity, pressure and light.
INP3010 & INP3011 - Innophase IoT - Talaria TWO™ Evaluation Kits | ||
Product | INP3010 | INP3011 |
Baseboard | EVB-A Baseboard, Arduino UNO Compatible (75.0mm x 53.3mm x 10mm) | EVB-A Baseboard, Arduino UNO Compatible (75.0mm x 53.3mm x 10mm) |
Talaria TWO Module Included (Mounted on Baseboard) | INP1010 (w/ PCB Antenna) | INP1011 (w/U.FL Antenna Connector) |
Environmental Sensors (Mounted on Baseboard) | Temperature & Humidity (Sensirion SHTC3) Pressure (Bosch BMP388) Light (TI OPT3002) | Temperature & Humidity (Sensirion SHTC3) Pressure (Bosch BMP388) Light (TI OPT3002) |
USB Interface | USB2.0 | USB2.0 |
USB Cable | Male USB A to Male USB Micro-B | Male USB A to Male USB Micro-B |
Antenna | Not Included | Stub Antenna with Cable & U.FL Connector |
Battery Holder | Dual “AA” Battery Holder with Wired Connector | Dual “AA” Battery Holder with Wired Connector |
Accessories | 4x Stand-Offs and 4x Screw Nuts (Attached) | 4x Stand-Offs and 4x Screw Nuts (Attached) |